| “This site contains affiliate links for which OEMDTC may be compensated” |
May 28, 2024 NHTSA CAMPAIGN NUMBER: 24V376000
Seat Belt Warning System Malfunction/FMVSS 208
A seat belt warning system that fails to alert occupants of an unbelted seat belt can increase the risk of injury during a crash.
NHTSA Campaign Number: 24V376
Manufacturer Tesla
, Inc.
Components SEAT BELTS
Potential Number of Units Affected 125,227
Summary
Tesla, Inc. (Tesla) is recalling certain 2012-2024 Model S, 2015-2024 Model X, 2017-2023 Model 3, and 2020-2023 Model Y vehicles. In the event of an unbelted driver, the seat belt warning light and audible chime may not activate as intended. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, “Occupant Crash Protection.”
Remedy
Tesla will release an over-the-air (OTA) software update. Owner notification letters are expected to be mailed July 27, 2024. Owners may contact Tesla customer service at 1-877-798-3752. Tesla’s number for this recall is SB-24-00-008.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Tesla has a Recall
Chronology :
– On April 18, 2024, as part of an internal compliance audit involving a MY 2024 Tesla Model X being tested to UNECE Regulation No. 16, Tesla identified that the seat belt reminder signals did not chime or display.
– From April 22, 2024, to May 14, 2024, Tesla investigated the condition, performed tests to characterize and recreate it, and began scoping the vehicles that potentially could be impacted by it.
– From May 14, 2024, to May 20, 2024, as part of its ongoing investigation, Tesla further developed and ran fleet query analytics to identify whether and how many affected vehicles may be operating with the condition.
– On May 20, 2024, having completed its assessment, Tesla made a voluntary determination to recall the affected vehicles.
– As of May 28, 2024, Tesla identified 104 warranty claims that may be related to the condition. Tesla is not aware of any collisions, fatalities or injuries that may be related to the condition.
34 Affected Products
Vehicles
3 Associated Documents
Recall 573 Report-Amendment 1 – 05/30/2024
RCLRPT-24V376-3527.PDF 216.411KB
Recall Acknowledgement
RCAK-24V376-1693.pdf 645.376KB
Recall 573 Report
RCLRPT-24V376-9242.PDF 216.407KB
Latest Recalls Documents
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- [Easy to Use--Work out of the box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like ABS SRS engine and transmission.The NT604 Elite obd2 scanner diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the car warning light after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even if you replace the new airbag.
- [5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 📢【NOTE: Please Check Compatibility First】➊ Autel AL619 is a basic OBD2 code reader that works with limited Specific Vehicle models from 1996-2015. ➋ All the functions are NOT universal for each vehicle, please contact us to check the compatibility before ordering via 📩AutelStoreOnline @ outlook . com📩, offer us your detailed Car Model, Year, VIN# (IMPORTANT), and the functions you need, and you will get the available solution in 12 hours.
- 🎉【2025 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.🚦📢Kindly note: AL619 only supports 2015 or pre-2015 cars. And services are not universal, please send us your car VIN# to check the compatibility before ordering.📩AutelStoreOnline @ outlook . com📩.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 AutelStoreOnline @ outlook . com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 【Professional 4 Systems Diagnostics】For DIYers addressing typical concerns like engine, transmission, ABS, and SRS, the TOPDON AD500 vehicle scanner provides specialized diagnostic solutions. It effortlessly interprets and eliminates fault codes and scrutinizes data streams, ensuring the prompt detection of issues.
- 【6 Reset Functions】The AD500 car diagnostic tool offers essential features like Oil Reset, Throttle Adaptation, SAS/TPMS/BMS/EPB Reset. Easily reset oil change indicators, fine-tune throttle response, and recalibrate steering angle sensors for optimal vehicle performance and maintenance convenience.
- 【Works Easier with AD500】The AD500 scanner combines a 5” touchscreen with buttons for easier and seamless operation. Elevate your diagnostic experience with DTC Lookup, Diagnostic data record, and printing diagnostic reports via email. Stay up to date with lifetime free upgrades via Wi-Fi, ensuring your tool is always equipped with the latest features.
- 【Fast Diagnostics, Instant Support】With AutoVIN, instantly obtain crucial vehicle details for expedited diagnostic processes. The AD500 code reader not only facilitates data stream recording for later review but also acts as a battery voltage monitor, providing valuable insights into your vehicle's battery health. If you encounter any diagnostic hurdles, share feedback with TOPDON for prompt professional support.
- 【Upgraded ArtiDiag500 for Peak Performance】Experience enhanced performance with the upgraded AD500 diagnostic tool, boasting a 4-core 1.5GHz CPU, 2GB RAM + 32GB ROM, and seamless operation with Android 11.0. Enjoy extended battery life with its 3350mAh capacity. Plus, benefit from TOPDON's 1-year quality backup for added peace of mind.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Global Support] Rest assured about compatibility with your vehicle and language – ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide, and is available in 12 languages. Whether it's for your car or preferred language, there's an ideal choice for you. Plus, it's fully compatible with Android 11 for smoother use.
- 【ENHANCED DIAGNOSTIC SCAN TOOL WITH ABS/SRS/ECM/TCM SYSTEMS】 The XpertAuto S515 OBD2 scan diagnostic tool helps diagnose issues with ABS, SRS, ECM, and TCM systems. This car diagnostic scan tool reads and clears error codes, reads data streams, retrieves ECU info,and quickly locates ABS, SRS, ECM, TCM problems
- 【8 HOT RESET SERVICES】The XpertAuto S515 professional level car code reader and reset tool offers 8 hot reset services, including oil, airbag, SAS, EPB, ETS, ABS bleed, DPF regeneration and battery reset. This car code reader is perfect for thoughtful and attentive service, covering everything from routine maintenance and warning light removal to auto part replacement and more
- 【PROFESSIONAL-GRADE OBD2 SCANNER】 The car scanner diagnostic tool delivers professional-grade functionality at a consumer price. It covers all the essentials: Read Codes, Erase Fault Codes, MIL Fault Indicator Light, Live Data, EVAP System Test, View Freeze-Frame, Vehicle Info, I/M Readiness, and DTCs Look-up, ensuring accurate diagnosis and peace of mind
- 【AUTOSEARCH VIN - SCREENSHOT & RECORDING】 The Vehicle Code Reader features intelligent Auto VIN technology for fast and accurate one-touch vehicle identification. It scans ECUs, collects vehicle information and performs diagnostics on selected systems. This car diagnostic tool comes with unique screenshot and video recording function, allowing you to save extensive data effortlessly
- 【MULTIPLE DISPLAY OF LIVE DATA】 The car diagnostic tool can display data streams through numbers, images, and a combination of both. It also allows comparison with historical data for a comprehensive view of your car's condition and changes at a glance. Car diagnostic reports can be easily saved, shared, printed, and emailed
- 【User-Friendly CRP123 V2.0 ELITE】Ready to use right out of the box, Same with the LAUNCH CRP123E/CRP123i v2.0, includes Lifetime Software Updates,4 System Scan+3 Reset Services and 5 Years of Backup.
- 【Newly Added 3 HOT Resets】All Level-up LAUNCH CRP123 V2.0 obd2 scanner with 3 Resets : Oil Reset ,Throttle Adaptation,and SAS Reset for LIFETIME! Reset your Oil life system, Optimize your engine with Throttle Adaptation and enhance your vehicle's handling and safety with SAS Reset.
- 【Intuitive Live Data Stream】 The CRP123 V2.0 OBD2 scanner offers a great balance of functionality and affordability. It allows you to view live data streams for the ENGINE, AT, ABS, and SRS systems, including preset or user-oriented data. You can graph, record, playback, and print this data, as well as read and reset codes for the engine, ABS, SRS, and transmission systems.
- 【Comprehensive OBDII Code Reader】 The LAUNCH CRP123 V2.0 scan tool supports all 10 modes of the OBDII standard, ensuring thorough and precise system diagnostics. It can read and clear DTCs, perform smog tests, check I/M readiness, and conduct O2 sensor and EVAP system tests. Additionally, it includes an OBDII code lookup tool and an acronym database to facilitate faster diagnosis and repair.
- 【Engine/ABS/SRS/Transmission Diagnostic Tool】 The Launch CRP123 V2.0 scanner supports generic OBDII codes (P0, P2, P3, and U0) and manufacturer-specific codes (P1, P3, and U1), as well as pending codes and freeze frame data. It monitors I/M readiness, provides live PCM stream data, and graphs up to four live data streams, such as Engine Coolant Temperature, Long & Short Fuel Trim, Accelerator Pedal Position Sensor, Throttle Valve Position, Generator Load Signal, Fuel Tank Pressure, Engine RPM, and Intake Air Temperature. It also clears DTC codes, turns off the MIL, resets monitors, and provides hints for the Data Link Connector (DLC) location.
- All New AD610 Pro - This remarkable tool has entirely new technology. Unlike other OBD2 scanners that merely support USB upgrades on PC and demand registration, ours offers WiFi updates without any registration requirements, thus saving 90% of the time it takes. Additionally, the operating speed of our new software has increased by 30% and the vehicles' compatibility has risen by 20%. The compatibility depends year and model, please inform VIN for compatible check.
- ABS Diagnosis & Reset - Effectively read and clear ABS error codes or reset ABS-related sensors after repairs. Addresses issues such as front or rear wheel speed sensor failure, sensor voltage irregularities, steering angle sensor faults, yaw rate, or G sensor malfunctions. Ensure safe driving with reliable system performance.
- SRS Diagnosis & Reset - Read and clear SRS error codes or reset SRS-related sensors after repairs. Resolves issues like crash data recorded on the driver side (airbag replacement required), occupant classification system defects, or seat track position sensor malfunctions. Helps avoid airbag failure in an accident.
- Optimal ABS Bleed, Smooth Braking - When there's air in the ABS, it affects braking performance. Our tool helps auto bleed the brake system by purging the air, ensuring no air bubbles in the brake lines, for proper operation and optimal performance. This maintenance task is typically done when replacing brake fluid or servicing brake components, to ensure braking system stability and reliability. Note: this feature is not compatible with vehicles that only support manual bleeding.
- SAS Calibration Essential - Enjoy precision steering and enhanced safety through our SAS calibration feature. By ensuring accurate alignment of your vehicle's steering angle sensor (SAS), SAS calibration delivers precise control, eliminates steering drift, and prevents uneven tire wear. Improve handling and maneuverability on the road, even in challenging conditions, while driving with confidence knowing that your steering system is finely tuned for maximum performance and safety.
- 【UPGRADE OF NT604-POWERFUL 5 RESETS】Wanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
- 【ENGINE/ABS/SRS/TRANSMISSION CODE READER】Don't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
- 【ABS BLEEDING OBD SCANNER】Do you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
- 【Best Bang For Your Buck!-FOXWELL NT614 Elite】1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use, more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
- 【SMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICE】With the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.
- Next-level OBD2 SRS ABS Scanner - Beyond the basic NT301 FOXWELL Scanner, this car obd2 scanners takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS DTCs, display the live data: wheel speed sensor, Airbag issues, wiring faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader CANNOT reset/erase any Airbag error codes or crash codes. Tips: Coverage will be vary on different car conditions, please check the functions coverage BEFORE purchasing. Supports WiFi updates. No registration or subscription required.
- Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensors, brake force distribution, and brake pressure, shown in 2 in 1 dynamic graphs for analysis. Easily read ABS trouble codes, view freeze frame data, and monitor ABS performance under emergency braking or slippery road conditions. This ABS scan tool also provides alerts for potential problems.
- Basic Check Engine Code Reader - This obd2 scanner diagnostic tool also can check CEL, read OBD-II modules instantly, display the live data with graph (engine RPM, coolant temp, fuel trim, sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Helps reduce risks and maintain top vehicle performance.
- Top ABS Brake Bleeding Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This ABS bleed scan tool will restore your brake pedal’s firmness by efficiently removing air from the ABS module. NOTE: Supports ABS bleeding only on certain vehicles. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site.
- User-Friendly & Budget-Friendly - Features a 2.8" LCD screen, enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know). This code scanner comes with a sturdy case for easy carrying. The code reader for cars and trucks will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-376
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Tesla, Inc. MAY 28, 2024 NHTSA Recall No. : 24V-376 Manufacturer Recall No. : SB-24-00-008 Manufacturer Information :
Manufacturer Name : Tesla, Inc.
Address : 1 Tesla Road
Austin TX 78725 Company phone : 6506815000
Population :
Number of potentially involved : 125,227 Estimated percentage with defect : 2 %
Vehicle Information :
Vehicle 1 : 2012-2024 Tesla Model S Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2021-2024 Model X, MY 2017-2024 Model 3, and MY 2019-2024 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : OCT 16, 2012 – APR 29, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2016-2024 Tesla Model X Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2021-2024 Model X, MY 2017-2024 Model 3, and MY 2019-2024 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : DEC 16, 2015 – APR 29, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-376 Page 2 Vehicle 3 : 2017-2023 Tesla Model 3 Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2021-2024 Model X, MY 2017-2024 Model 3, and MY 2019-2024 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : JUL 15, 2017 – NOV 15, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2020-2023 Tesla Model Y Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2021-2024 Model X, MY 2017-2024 Model 3, and MY 2019-2024 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : JAN 13, 2020 – NOV 15, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : FMVSS No. 208, S7.3(a)(1), requires short-duration, audible and visual seat belt reminder signals to alert the driver that their seat belt is not fastened.
Specifically, when the vehicle ignition is moved to the “on” or “start” position and the driver’s seat belt is not fastened, a continuous or intermittent audible signal must activate for not less than four seconds and a visual signal must display for not less than sixty seconds. On certain affected vehicles, an open trace in the driver seat occupancy switch may result in a loss of the audible and visual seat belt reminder signals when the driver’s seat belt is not fastened after the vehicle ignition is moved to the “on” or “start” position.
FMVSS 1 : 208 – Occupant crash protection FMVSS 2 : NR
Description of the Safety Risk : A vehicle that does not alert the driver to an unfastened seat belt after the
vehicle ignition is moved to the “on” or “start” position does not comply with FMVSS No. 208, S7.3(a)(1), which may increase the risk of injury in a collision.
Description of the Cause : NR The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-376 Page 3 Identification of Any Warning NR
that can Occur : Involved Components : Component Name 1 : Vehicle software
Component Description : On affected vehicles, software releases that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Component Part Number : NR Component Name 2 : Tesla Model 3 1st row SBR
Component Description : On affected vehicles (applicable across all model and model years), the first-row driver seat belt reminder sensor. (Component manufacturer is I.G. Bauerhin GmbH, Wiesenstraße 29 Gruendau, Germany).
Component Part Number : 1099592-00-F Supplier Identification : Component Manufacturer
Name : Tesla Address : 1 Tesla Road
Austin Texas 78725
Country : United States Chronology :
– On April 18, 2024, as part of an internal compliance audit involving a MY 2024 Tesla Model X being tested to UNECE Regulation No. 16, Tesla identified that the seat belt reminder signals did not chime or display. – From April 22, 2024, to May 14, 2024, Tesla investigated the condition, performed tests to characterize and recreate it, and began scoping the vehicles that potentially could be impacted by it. – From May 14, 2024, to May 20, 2024, as part of its ongoing investigation, Tesla further developed and ran fleet query analytics to identify whether and how many affected vehicles may be operating with the condition. – On May 20, 2024, having completed its assessment, Tesla made a voluntary determination to recall the The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-376
Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
affected vehicles.
– As of May 28, 2024, Tesla identified 104 warranty claims that may be related to the condition. Tesla is not aware of any collisions, fatalities or injuries that may be related to the condition.
Description of Remedy :
Description of Remedy Program : At no cost to customers, affected vehicles will receive an over-the-air
(OTA) software remedy, which is expected to begin deploying to affected vehicles in June 2024. The software remedy will remove dependency on the driver seat occupancy switch from the software logic and only rely on driver seat belt buckle and ignition status to activate the seat belt reminder signals. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production :
No further action is necessary from owners whose vehicles are equipped with the upcoming software release.
The remedy component will comply with FMVSS No. 208, S7.3(a)(1), whereas the recalled component does not.
Beginning on April 29, 2024, a functional test was introduced in Model S and Model X seat assembly to verify the functionality of the driver seat occupancy switch for purposes of ensuring compliance with FMVSS No. 208, S7.3(a)(1), aligning with the same functional test that was introduced in Model 3 and Model Y seat assembly beginning on November 15, 2023, as part of continued production improvements. Recall Schedule :
Description of Recall Schedule : All Tesla stores and service centers will be notified about this recall on or
shortly after May 30, 2024.
Planned Dealer Notification Date : MAY 30, 2024 – MAY 30, 2024
Planned Owner Notification Date : JUL 27, 2024 – JUL 27, 2024
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 24V-376
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Tesla, Inc. MAY 30, 2024 NHTSA Recall No. : 24V-376 Manufacturer Recall No. : SB-24-00-008 Manufacturer Information :
Manufacturer Name : Tesla, Inc.
Address : 1 Tesla Road
Austin TX 78725 Company phone : 6506815000
Population :
Number of potentially involved : 125,227 Estimated percentage with defect : 2 %
Vehicle Information :
Vehicle 1 : 2012-2024 Tesla Model S Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2015-2024 Model X, MY 2017-2023 Model 3, and MY 2020-2023 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : OCT 16, 2012 – APR 29, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2015-2024 Tesla Model X Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2015-2024 Model X, MY 2017-2023 Model 3, and MY 2020-2023 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : DEC 16, 2015 – APR 29, 2024
VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 24V-376 Page 2 Vehicle 3 : 2017-2023 Tesla Model 3 Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2015-2024 Model X, MY 2017-2023 Model 3, and MY 2020-2023 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : JUL 15, 2017 – NOV 15, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2020-2023 Tesla Model Y Vehicle Type :
Body Style :
Power Train : NR
Descriptive Information : The subject population includes Model Year (MY) 2012-2024 Model S, MY 2015-2024 Model X, MY 2017-2023 Model 3, and MY 2020-2023 Model Y vehicles that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Production Dates : JAN 13, 2020 – NOV 15, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : FMVSS No. 208, S7.3(a)(1), requires short-duration, audible and visual seat belt reminder signals to alert the driver that their seat belt is not fastened.
Specifically, when the vehicle ignition is moved to the “on” or “start” position and the driver’s seat belt is not fastened, a continuous or intermittent audible signal must activate for not less than four seconds and a visual signal must display for not less than sixty seconds. On certain affected vehicles, an open trace in the driver seat occupancy switch may result in a loss of the audible and visual seat belt reminder signals when the driver’s seat belt is not fastened after the vehicle ignition is moved to the “on” or “start” position.
FMVSS 1 : 208 – Occupant crash protection FMVSS 2 : NR
Description of the Safety Risk : A vehicle that does not alert the driver to an unfastened seat belt after the
vehicle ignition is moved to the “on” or “start” position does not comply with FMVSS No. 208, S7.3(a)(1), which may increase the risk of injury in a collision.
Description of the Cause : NR The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-376 Page 3 Identification of Any Warning NR
that can Occur : Involved Components : Component Name 1 : Vehicle software
Component Description : On affected vehicles, software releases that are or were operating with certain seat belt reminder software logic, as described in the defect description.
Component Part Number : NR Component Name 2 : Tesla Model 3 1st row SBR
Component Description : On affected vehicles (applicable across all model and model years), the first-row driver seat belt reminder sensor. (Component manufacturer is I.G. Bauerhin GmbH, Wiesenstraße 29 Gruendau, Germany).
Component Part Number : 1099592-00-F Supplier Identification : Component Manufacturer
Name : Tesla Address : 1 Tesla Road
Austin Texas 78725
Country : United States Chronology :
– On April 18, 2024, as part of an internal compliance audit involving a MY 2024 Tesla Model X being tested to UNECE Regulation No. 16, Tesla identified that the seat belt reminder signals did not chime or display. – From April 22, 2024, to May 14, 2024, Tesla investigated the condition, performed tests to characterize and recreate it, and began scoping the vehicles that potentially could be impacted by it. – From May 14, 2024, to May 20, 2024, as part of its ongoing investigation, Tesla further developed and ran fleet query analytics to identify whether and how many affected vehicles may be operating with the condition. – On May 20, 2024, having completed its assessment, Tesla made a voluntary determination to recall the The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 24V-376
Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
affected vehicles.
– As of May 28, 2024, Tesla identified 104 warranty claims that may be related to the condition. Tesla is not aware of any collisions, fatalities or injuries that may be related to the condition.
Description of Remedy :
Description of Remedy Program : At no cost to customers, affected vehicles will receive an over-the-air
(OTA) software remedy, which is expected to begin deploying to affected vehicles in June 2024. The software remedy will remove dependency on the driver seat occupancy switch from the software logic and only rely on driver seat belt buckle and ignition status to activate the seat belt reminder signals. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production :
No further action is necessary from owners whose vehicles are equipped with the upcoming software release.
The remedy component will comply with FMVSS No. 208, S7.3(a)(1), whereas the recalled component does not.
Beginning on April 29, 2024, a functional test was introduced in Model S and Model X seat assembly to verify the functionality of the driver seat occupancy switch for purposes of ensuring compliance with FMVSS No. 208, S7.3(a)(1), aligning with the same functional test that was introduced in Model 3 and Model Y seat assembly beginning on November 15, 2023, as part of continued production improvements. Recall Schedule :
Description of Recall Schedule : All Tesla stores and service centers will be notified about this recall on or
shortly after May 30, 2024.
Planned Dealer Notification Date : MAY 30, 2024 – MAY 30, 2024
Planned Owner Notification Date : JUL 27, 2024 – JUL 27, 2024
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-06-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.